Chevron Digital Timer Ew-32 User Manual [portable] Site

Press the WEEK and HOUR buttons simultaneously. A RANDOM or R icon will appear on the display screen.

Many users cry "It's not working!" because they misunderstand this slider. Locate the small 4-position switch:

If the screen is blank, plug the unit into a live box or turn on the breaker for 10 minutes to charge the internal battery, then press the button with a paperclip. How to Set the Current Time Press and hold the CLOCK button throughout this process.

If you prefer the official manufacturer’s guide: chevron digital timer ew-32 user manual

Press to select the exact same day combination you chose for 1 ON .

If you have lost your original paper manual, this comprehensive guide will walk you through the specifications, button layouts, initial setup, and advanced programming steps for your Chevron Digital Timer EW-32. 1. Technical Specifications

: Plug the timer into a live outlet for at least 14 hours to fully charge the internal memory backup. Press the WEEK and HOUR buttons simultaneously

Hit , then use + / - to pick which days you want it to run (e.g., just weekdays, weekends, or every day). Set your ON time, press SET , then repeat for the OFF time.

Press the button to exit programming and save your settings. Deleting or Clearing a Program

| Feature | What the Manual Says | Real-World Usability | |---------|----------------------|------------------------| | | Press and hold CLOCK , press HOUR / MIN , release CLOCK . | Works, but CLOCK is also used to exit programming – easy to lose changes. | | Programming (ON/OFF) | Press PROG once → set ON time → press PROG again → set OFF time. | Logical, but manual doesn’t emphasize that you must set both ON and OFF in sequence for one event. | | Random security mode | Hold RANDOM for 3 sec → “RND” appears. | Manual explains it turns device on/off unpredictably within ±30 min of set times – good for vacation mode. | | Summer time (DST) | Press +1h button. | Works instantly, but manual doesn’t warn that this shifts all programs unless you disable it. | | Battery backup | “Retains programs during short power outage” – no mention that display may go blank. | Many users think it’s broken; actually, it keeps time internally but screen may dim. | Locate the small 4-position switch: If the screen

A: The switch must be in Auto mode. If it’s in Off or On, the +/– buttons are disabled.

button. This clears any existing memory and restores factory defaults. Setting the Current Time Enter Time Mode : Press and hold the button for 3 seconds. Adjust Values buttons to cycle through and select the correct : Press the button to confirm each individual selection. Programming On/Off Schedules