Corghi Exact 60 Manual Verified -

Enter the service menu by pressing F3 and input the service passcode. Select .

Ensure the alignment lift is locked on its safety levels. Re-tighten wheel clamps. Improper lock or skipped ROC

Allow the Corghi Exact alignment software to load completely into the main menu. Sensor Calibration Procedure corghi exact 60 manual

Lower the vehicle back onto the turnplates and bounce the suspension a few times to settle the chassis. Step 4: Steering Measurement (Caster Sweep) Install the brake pedal depressor to lock the brakes.

Ensure lift posts, jacks, or vehicle body panels are not obstructing the path between the sensors. Failed or skipped Runout Compensation (ROC). Enter the service menu by pressing F3 and

Raise the vehicle slightly if using a 3-point clamp, or roll the vehicle backward and forward as prompted by the screen graphics.

: Perform a "push-type" or 2/3-point ROC to account for any rim irregularities. Re-tighten wheel clamps

This article acts as a comprehensive guide to navigating the Corghi Exact 60 system, covering installation, user procedures, calibration, and troubleshooting based on standard operational practices for Corghi alignment systems. 1. Introduction to the Corghi Exact 60 CCD Aligner

The factory manual (Corghi part 8102019) is technically dense but has three shortcomings: