Manual High Quality: Deutsche Technologies Rv3 Digital Satellite Finder

With the meter powered on and connected, follow these steps to find and optimize your satellite signal. Step 1: Rough Alignment

The threaded port where you connect the coaxial cable running directly from your satellite dish's Low Noise Block (LNB).

Align your dish until the signal quality bars peak and the "Lock" light glows. Confirm with the live TV preview! deutsche technologies rv3 digital satellite finder manual

Slowly rotate your dish horizontally () and vertically ( Elevation ).

:

The satellite receiver is powered off, or the coaxial cable is faulty.

(if not powering via the receiver) User Manual Reference Card 2. Hardware Overview The RV3 features a straightforward interface: With the meter powered on and connected, follow

Listen for the audible tone or watch the LCD screen. When the meter detects a signal, the tone pitch will rise, and the numerical value on the screen will increase. Step 5: Fine-Tuning and Attenuation

If you are running into specific on your television screen Confirm with the live TV preview