Fnirsi1014d Firmware Update Work Portable Jun 2026
Temporarily disable aggressive antivirus programs on your PC, as they might block or corrupt the .bin firmware file transfer. 🛠️ Step 1: Download the Official Firmware
Remove the internal SD card, wipe it completely using a tool like SD Card Formatter , format it to FAT32, and use Method 1 instead.
: Power off the oscilloscope, then power it back on. The device will detect the file, display a progress bar for roughly 20 seconds, and reboot automatically once complete. Critical Risks & Troubleshooting fnirsi1014d firmware update work
Locate the small MicroSD card slot on the main circuit board. Step 2: Prepare the SD Card Remove the MicroSD card from the board. Insert the card into a PC using an SD card reader.
For advanced users, the official firmware isn't the only option. Due to the open nature of the device's architecture, the maker community (including projects found on the EEVblog Forums ) has actively reverse-engineered the 1014D. Custom firmwares have been developed to improve trigger mechanisms, increase data refresh rates, and add enhanced features that the stock software lacks. The device will detect the file, display a
Wait for the progress bar to reach 100%. The device will automatically reboot. Troubleshooting Common Update Failures Issue 1: Device Stuck on a White Screen
: This can happen if the internal SD card is corrupted or the wrong firmware was flashed. Insert the card into a PC using an SD card reader
Connect the USB cable from the back of the oscilloscope to an open USB port on your computer.
If you have saved screenshots or waveform data on the internal storage of the oscilloscope, export them to your PC. The firmware update process may format the internal flash memory. Step 2: Put the Device into Update Mode
: Connect your oscilloscope to a computer using a standard USB data cable.
By following this guide, you should be well-equipped to handle any firmware-related work on your FNIRSI 1014D. Good luck, and happy repairing and tinkering!
