On-site, the technician connects the LinkRunner AT to a copper or fiber drop and presses the button. In less than 10 seconds, the device performs a battery of verified checks: Measures PoE voltage under load.
Install on a Windows PC (compatible with Windows XP through Windows 10) and connect the tester using the provided mini-USB cable.
View detailed breakdowns of wiremap configurations, cable lengths to opens/shorts, and port advertisements (CDP/LLDP/EDP). 3. Maintenance and Firmware Updates
: It serves as the local portal for updating the tester’s internal software/firmware and managing file transfers to and from the unit. ITM Instruments Comparison: LinkRunner Manager vs. Link-Live Cloud linkrunner at manager software verified
| Capability | Benefit | |------------|---------| | | LinkRunner auto-downloads job specs from Manager; any deviation flags immediately. | | Verification badge on every test | Green “Verified” status gives managers, clients, and auditors instant confidence. | | Remote pass/fail validation | Manager Software re-checks each result upon upload — no more “fat-finger” passes. | | Tamper-resistant results | Verified results cannot be edited or retested without creating a new audit trail. | | Link-Live integration | Real-time sync from field to cloud to manager dashboard. |
Related search suggestions (terms I would use to find up-to-date comparisons and model details) (I'm now generating brief related search terms to assist further.)
When a test result in Manager Software shows , it means: On-site, the technician connects the LinkRunner AT to
: If you use higher-tier devices like the EtherScope nXG or OneTouch AT, turn on packet reflection mode. This allows you to run end-to-end line-rate throughput validation up to 1 Gbps across your local or wide-area network paths.
This is where the series (ranging from the legacy LR-AT 2000 to the next-generation LinkRunner AT 3000 and LinkRunner AT 4000 ) proves indispensable. However, an elite hardware tester is only half the battle. The true power of these testers is unlocked through the accompanying LinkRunner AT Manager Software .
Extracting locally saved test results from the tester to a local PC. ITM Instruments Comparison: LinkRunner Manager vs
: You can create and manage standardized test profiles to ensure that every technician is running the same critical tests. This includes configuring 802.1x security settings IPv6 support , and VLAN identifiers. Result Documentation
The software configures the unit to listen for Link Layer Discovery Protocol (LLDP), Cisco Discovery Protocol (CDP), and Extreme Discovery Protocol (EDP) frames. This reveals the precise switch name, IP address, exact slot, specific port number, and active VLAN allocation instantly. LinkRunner AT Manager and Updating Software - NetAlly
The LinkRunner AT Manager software serves as the offline desktop companion to NetAlly’s legacy handheld testers. While modern ecosystem platforms lean heavily toward cloud synchronization, many high-security networks—such as those found in military, banking, and government sectors—prohibit connected cloud utilities.
: Manage multiple units from a single dashboard, keeping track of where they are and which version of firmware they are running.
Technicians can create, manage, and move up to 10 different profiles between the LinkRunner AT and the PC. A profile defines the exact parameters of the AutoTest, such as specific VLANs, IP addresses, or security settings.