Printcopyinfo Error Codes New Fixed Jun 2026

| Error Code | Likely Cause | Common Brand | First-Line Action | | :--- | :--- | :--- | :--- | | | Copy-restricted document detected. | Xerox | Immediately stop the copy job and advise the user not to proceed. | | SC491 | Current leak from drum, developer, or transfer. | Ricoh | Check all harness connections to the HVPS board. | | E061 | Mismatch between paper size loaded vs. machine settings. | Toshiba | Verify the paper in the drawer matches the size in the device menu. | | F092 | Memory chip (SRAM/NVRAM) corruption on the controller board. | OKI | Enter service mode (08) and initialize the memory chip. | | C-3808 | Fuser unit secondary sensor overheating beyond 236°C. | Konica Minolta | Turn off the machine immediately; likely requires hardware replacement. |

This chart provides an overview of some of the most frequently encountered device errors, their likely causes, and first-line actions.

Navigate to C:\Windows\System32\spool\PRINTERS and delete all contents. Restart the Print Spooler service ( net start spooler ). Deep-Dive: 400-Series Hardware & Mechanical Errors printcopyinfo error codes new

The era of simple error codes like "PC Load Letter" is long gone. Today’s are complex, nuanced, and deeply integrated with cloud authentication, security policies, and metadata streaming. The new errors highlighted above— 0xE7F3 , 0xB42A , 0xC991 , 0x3A4D , and 0xE001 —represent a shift toward secure, accountable printing.

| Code | Description | Action | |------|-------------|--------| | 140 | Copy count zero | Client application must send copies ≥1 | | 142 | Collate not allowed with stapling | Turn off stapling when collating | | Error Code | Likely Cause | Common

Right-click your device icon in the control panel, click Printer Properties , select Preferences , and make sure user tracking codes match your active database.

"No," Elias whispered. He ran to the master console. He had to roll back the update. He had to force a SYSTEM_RESTORE . | Ricoh | Check all harness connections to the HVPS board

If you are using PRINTCOPYINFO in a Win32 app (via DEVMODE or DocumentProperties ):

Empty toner, incorrectly installed toner, or a failed drum unit.

Network administrators and IT professionals frequently encounter synchronization and logging errors within managed print environments. Among these, PrintCopyInfo errors—particularly when deploying new software updates or migrating print servers—can disrupt workflows and halt production.

When dealing with modern printing and copying infrastructure, "PrintCopyInfo" error codes typically refer to a categorized system used by managed print services or specific firmware to diagnose hardware, network, or spooler failures.