Systec It3 User Manual [2021] Jun 2026

Use the alphanumeric keypad to type the exact value of the test weight.

Mount the IT3 unit on a DIN rail (EN 50022) or directly onto a flat surface using the provided screw holes. Ensure the location is free from excessive vibration and temperature fluctuations.

Every connection must enter through factory-sealed cable glands to maintain the IP69K environment rating. Stripped jacket wires should tightly seat within the gland compression sleeves. Ensure that internal ground wires route safely back to a clean, isolated master protective earth grid to neutralize stray electrical noise. Analog Load Cell Integration systec it3 user manual

The IT3 displays alphanumeric error codes (e.g., E-15, E-22). The manual includes a complete table:

The is a universal, Weights & Measures (W&M) approved industrial weighing terminal designed to operate reliably in demanding environments. Built with a rugged IP69K stainless steel housing, it integrates advanced weight processing with flexible software modes for applications like checkweighing, vehicle tracking, parts counting, and precision liquid filling. Use the alphanumeric keypad to type the exact

Inspect load cell cables for cracks, cuts, or chemical degradation.

I can provide more detailed information on or interface configuration if you need it. Share public link Analog Load Cell Integration The IT3 displays alphanumeric

When physical weights are unavailable, configuration parameters allow engineers to input the nominal cell sensitivity rated values (mV/V) directly. Enter individual load values derived from the manufacturer's load cell testing sheets to construct an idealized linear response curve. 3. Linearization of Load Curves

If the weight reading drifts or fluctuates wildly, the manual suggests checking the raw cell output in millivolts (