Issue 2: Card swiped, light turns green, but lock does not open
This guide provides a comprehensive overview of the , designed to assist with installation, programming, and troubleshooting of this popular security device . The V2000-c is a stand-alone RFID proximity access control unit, widely used for enhancing security in office buildings, apartments, and residential properties. V2000-C RFID Access Control Overview
For more detailed diagrams and manual downloads, you can refer to manufacturers like Scribd's repository or specific troubleshooting steps for your installation? RFID Programming Guide V2000-c Rfid Access Control User Manual
Use the rear plate of the enclosure as a template to mark drill locations for the wall anchors.
To perform any administrative task, you must first enter the system's programming mode. Issue 2: Card swiped, light turns green, but
Do you need a specific for a dual-door system?
Connect the wire of the V2000-C directly to the Positive (+) terminal of the Magnetic Lock. Configuration B: Fail-Secure Lock (e.g., Electric Strike) An electric strike requires power only when unlocking. RFID Programming Guide Use the rear plate of
Connect Power Supply (GND) to Keypad GND and Lock (-).
For further support, consult your distributor for hardware-level repairs. The V2000-c’s simplicity is its strength – there is no cloud to fail, no subscription fee, and no software to crash. Just security that works.
You can assign unique User IDs (001 to 999 or higher) to keep track of individual tokens. Enter Programming Mode. Press 1 . Enter a 3-digit or 4-digit (e.g., 001 ) + # .
The V2000-C RFID access control system is a cutting-edge security solution designed to provide efficient and secure access management for various applications, including offices, residential areas, and industrial sites. This user manual aims to provide a comprehensive guide for users to understand the features, installation, configuration, and operation of the V2000-C RFID access control system.